Mimaki India Private Limited

Mimaki TS55-1800 is the evolutional sublimation transfer inkjet printer for textile/apparel use, which achieved the high production ability with the maximum printing speed 135 sqm/h, the excellent functions and useful optional items ensuring the long-time continuous operation, and the reduction of running cost of manufacturing.

Maximum output speed of 135 sqm/h (1,453 sq.ft/h) - Incorporates various print modes suitable for any work, ranging from high-speed print with a maximum rate of 135 sqm/h (1,453 sq.ft/h) to practical quality print with output speed of 50 sqm/h (538 sq.ft/h) and finally, quality-oriented enhanced picture quality print speed of 31 sqm/h (333 sq. ft/h). The practical quality mode achieves approximately 130% (*4) higher productivity in comparison with our conventional model (TS300P-1800).* Comparison using TS55-1800:600x600dpi, 2pass and TS300P-1800:720x720dpi, 4pass, Hi (in the practical quality mode)

Option units provide for the achievement of low running cost and long-time continuous operation
Mini jumbo roll unit - This is a feeding unit to load [Mimaki Vision Jet-X] transfer paper with a length of about 2,500m (8,202 ft). Reduces the cost per square meter and shortens the downtime due to media replacement in comparison to smaller transfer paper rolls.
10kg (22 lb) ink supply unit - This is an ink supply unit to set a 10kg (22 lb) ink tank for a single color. Compared with the conventional 2L ink pack, the running cost is much reduced and the downtime due to ink replacement is shortened.
Extended heater - This is an extended heater installed to the lower part of the standard heater. The heater enhances the ink-drying capability and prevents the "blocking" of medium (caused by still wet ink obstructing the feeding of the media during high-speed print), thus ensuring stable production.

Newly developed heads to ensure high-quality print even at high speed"MAPS" functionality reduces banding - The "MAPS" functionality providing gradation to printed pass boundaries maintains stable print quality by reducing banding and uneven color. The "TS55-1800" equipped with newly developed heads enables the "MAPS" in the high-speed mode, which has been unavailable so far. The technology allows the simultaneous pursuit of both high speed and high quality.* MAPS: Mimaki Advanced Pass System

With two newly developed heads, the TS100-1600 has pursued high quality, high productivity, and stable operation as a Sublimation transfer inkjet printer. Achieves about twice the high-speed printing of conventional machine for textiles*.

In addition to NCU (Nozzle Check Unit), NRS (Nozzle Recovery System) and MAPS4 (Mimaki Advanced Pass System4), which enable stable high quality printing, the DAS (Dot Adjustment System) was incorporated into the new “100 series” printers. Dot position and feed correction, which used to take a lot of time and effort to do manually, can now be done automatically, reducing the workload on the operator.

* When compared to our previous models: JV150-160 (equipped with water-based sublimation ink) and TS30-1300

All-in-one model that can handle everything from sample creation to large-lot production - Thanks to digital printing that does not require plate-making, orders can be placed for as little as one sheet, making it possible to reduce costs for small-lot production.

High speed printing of up to 70 m²/h for high productivity - Various print modes are available to meet your work needs, from the fastest mode (70 m²/h) to practical quality mode (46 m²/h) and high quality mode (19 m²/h). Also, in the fastest mode, productivity is about twice as high as that of our conventional model (JV150-160).

Latest features that achieve Mimaki quality
DAS (Dot Adjustment System) - The UJV100-160 is equipped with the DAS, a function to automatically adjust the dot position and feeding amount that affect print quality.
When media or printing conditions are changed, an adjustment of ink dot position and media feed amount to suit is necessary.As the DAS automatically performs these operations, printing can be performed without any labor or variations in adjustments by the operator.

Designed for textiles and apparel printing, TS330-1600 is a water-based dyesublimation inkjet printer achieving superb productivity of 69m2/h in Draft modeand high image quality through Mimaki printing technology. Additionally, theprinter incorporates improved conveyance mechanism and renewed usability,enabling stable and constant high quality printing.